What work should be done after the sun room is designed and installed

1. Opening and closing sealing test

When the mobile sun room is built, it must be opened and closed several times for testing when it is delivered.

Because many times, because some owners do not know how far each module needs to be closed before it is fully closed, it also leads to leakage of rain when the module is not completely closed. Do not think that there is a problem with the manufacturer's installation, it is likely to be caused by no strict, in order to facilitate use in the future, we must pay attention to this detail when delivering.

2. Water leakage test

After the installation is completed, do not rush to use, so that the installation master can go after the installation, be sure to remember to let the installation master finish the water leakage test before leaving.

The doors and Windows of the terrace sun room in use, the action should be light, push and pull naturally; Find a problem do not pull hard push, should first eliminate the fault, ash, deformation and other main reasons for the difficulty of pushing and pulling. Keep doors and Windows clean, especially the push and pull grooves clean. Dust accumulation in the tank and sealing top can be vacuumed. When cleaning the sun room doors and Windows, people do not stand on the frame, and do not pull the aluminum frame to support, otherwise it will easily lead to the deformation of the frame.

There are many styles of flexible sun room, installation can be selected according to their own preferences and the actual situation of the yard, square or round. Coupled with flexible opening and closing, small yards can also be a good choice for installation. Moving the sun room can pull apart the partition and connect with the area of the yard, which will look more spacious visually.